A plate truss highway span engineered for sustained vehicle loading, including heavy haul and mining traffic. Primary members are built up from ASTM A588/A588M Gr.B weathering steel plate, fully welded in the shop, match-drilled at splices, and verified by full trial assembly.
Design, fabrication, and inspection follow the same standard chain from calculation to shipping dossier—so the structure that arrives on site is the structure that was checked on paper.
Design Basis & Standards
-
Design Load: AASHTO LRFD Bridge Design Specifications (Service I/II, Strength I, and Fatigue II limit states applied to the specified live load model).
-
International Codes: BS 5400, EN 1993-2, or CAN/CSA-S6 checks available upon request.
-
Fatigue & Fracture: All primary members are treated as fracture-critical or fatigue-critical elements in both design and inspection planning.
-
QA Protocol: 100% UT on full-penetration welds, CVN toughness to Zone 2 or Zone 3, Fatigue Categories B, C, and E assessed with toe treatment.

Structural System & Material Specifications
Connection, Fatigue & Durability Design
-
Slip-Critical Connections: High-strength friction-grip field splices to AISC/RCSC. Holes are drilled or sub-punched and reamed (no punched full-size holes in main members).
-
Fatigue Control: Details selected to avoid out-of-plane distortion. Weld toe treatment or grinding applied where stress ranges demand.
-
Durability by Detailing: Drip edges, slope, and drainage paths arranged so water leaves the structure. Vented/open details prevent moisture traps.
-
Galvanic Isolation: Weathering steel isolated from concrete, timber, and stainless to prevent galvanic action and staining.
-
Inspection Access: Handholds, walkways, and safe routes designed directly into the panel points.
Fabrication & Quality Control
-
Shop Capability: Plate thickness up to 100 mm, built-up members, and full-penetration welding under controlled conditions.
-
Welding: AWS D1.5/D1.5M or EN 1090-2 up to EXC3 with qualified WPS/PQR and welder records.
-
Distortion Control: Balanced welding sequence, stiffeners, and controlled post-weld straightening.
-
Inspection: Hold points at material ID, fit-up, welding, dimensional, trial assembly, and packing.
-
NDT: 100% visual, UT on all full-penetration groove welds, and MT/PT on fatigue-critical toes.
-
Traceability: Heat number traceability from mill certificate to individual member, recorded on the as-built set.
Trial Assembly & Site Erection
-
Trial Assembly: Full-span or matched-segment trial assembly on levelled beds. Camber, panel geometry, splice fit, and bearing seat positions are verified.
-
Match-Marking: Every member is match-marked with its erection sequence and connection group.
-
Erection Methods: Lifting plan per module (with rigging arrangement and permitted wind speed) or launching method with nose girder/temporary rollers where crane access is restricted.
-
Documentation: Erection manual, torque schedule, and sequence drawings issued. Remote support or site supervisor available.

Documentation & Testing Package
-
Design calculations, shop drawings, mill certificates (with heat numbers), WPS/PQR, and welder qualifications.
-
NDT reports and weld maps, dimensional and camber records, trial assembly report, and surface treatment records.
-
Packing list with QR-coded member index, erection drawings, and O&M manual.
-
Optional: Static load testing of the completed span with a calibrated report suitable for client acceptance.
About Our Company
Hangzhou FAMOUS Steel Engineering Co., Ltd. is an integrated structural steel manufacturer and global exporter based in Hangzhou, Zhejiang, China.
We provide one-stop services from design and detailing to fabrication, surface treatment, and export delivery. Certified to ISO 9001 and CE (EN 1090), our in-house capabilities ensure that every heavy-duty highway bridge meets the most rigorous international engineering standards.
🌐 Websites: www.famoussteel.com | www.steelfabricat.com
📩 Next Step
Provide the span, clearance envelope, live load model, traffic category, site exposure classification, and reference drawings. We will return a design basis statement, preliminary member sizing, 3D model, and budgetary quotation within 5 working days.
Contact us today for a tailored, heavy-duty steel bridge solution.
