Economic Concrete Steel Reinforcing Mesh Bar Fabrication With Modeling Detailing Service

Economic Concrete Steel Reinforcement Bar Fabrication With Modeling & Detailing Service

Reinforcing bar is a common steel bar that is hot rolled and is used widely in the construction industry, especially for concrete reinforcement. Steel rebar is most commonly used as a tensioning device to reinforce concrete and other masonry structures to help hold the concrete in a compressed state. Concrete is a material that is very strong in compression, but virtually without strength in tension. To compensate for this imbalance in a concrete slab's behavior, reinforcement bar is cast into it to carry the tensile loads.

Common steel or concrete reinforcement bar is supplied with heavy ridges to assist in binding the reinforcement to the concrete mechanically - this is commonly referred to as deformed bar.

Specification:

3.Specified Physical Properties

Remark:Yield,ratio and elongation limits are characteristic values

4.Mass Tolerance
Specific Mass Tolerance for all bar diameters=nominal mass per meter±4.5%

5.Chemical Analysis

500mpa steel reinforcing mesh suitable for use in a variety of applications including:

1. Concrete footpaths

2. Industrial and commercial ground slabs

3. Precast Panel construction

4. Residential slabs and footings

Main Types of Reinforcing Steel Mesh

1. Square Reinforcing Mesh: commonly used in reinforced concrete slabs.

2. UTEMESH: a compact 4 m x 2 m ribbed mesh that is safe and legal to transport on utes and

small trucks without overhang.

3. Made-to-Size Mesh: a customized mesh according to client’s need.

4. Trench Mesh: typically used in residential and industrial buildings to reinforce concrete footings

and beams.

5. Rectangular Mesh: commonly used in reinforced concrete slabs such as pavements, precast

panels, warehouse and industrial shed slabs, tilt-up slabs, driveways and patio slabs.

6. Tank Mesh: designed to suit various types of concrete tank tank designs.

7. Mine Mesh: specific solutions for both coal and metalliferous mines