📌 Short Description

• Product Type: Custom-fabricated H Beam and Column Members

• Supply Model: Mill Direct (Rolling, cutting, drilling, welding, and finishing all in one factory)

• Core Advantage: No middlemen between your drawings and our cutting line.

• Fabrication: CNC Cutting, Drilling, Copes/Notches, SAW & GMAW Welding, Built-up H Sections

• Quality Standard: EN 1090-2, AISC 303, welders certified to EN ISO 9606

• Delivery: Ready to lift into position with piece marks, hole groups, and surface systems completed.

🏭 1. Mill Direct: One Source For The Whole Frame

The company has rolled and fabricated structural steel since 2000, with 1,200–1,300 people across its own workshops and an annual output of USD 500–600 million. Columns, rafters, bracing, and secondary members all come from the same plant under one contract and one quality record.

• In-House Engineering: Drawings are reviewed and shop drawings issued in-house before any steel is cut.

• One-Stop Processing: Rolling, cutting, welding, blasting, painting, and galvanizing coordinated under one roof.

• No Supplier Chasing: One delivery date and one packing list for the entire frame.

• Global Export: Exported to 60+ countries, with English, Spanish, and Russian-speaking engineers on account.

⚙️ 2. Custom Cutting At The Source

Cutting is planned against your member schedule, not a catalogue. The cut list is nested to keep waste low, and each piece is marked with its member number as it leaves the saw, so the bundle can be checked against the drawing on-site.

• Precision Cutting: CNC plasma and band saw cutting, square ends, and clean edges ready for welding or bolting.

• Optimized Nesting: Cut list optimized for nesting, lowering both material loss and freight volume.

• Single Setting: Holes, copes, and notches produced at the same setting as the cut, avoiding field reaming.

• Clear Marking: Piece mark stencilled on every member, matching the erection drawing sequence.

🔧 3. Welded Sections And Plate Work To Drawing

Where a rolled section does not exist for the load, the section is built up from plate and welded. The same team then handles the connection preparation, which is where most site problems are created or avoided.

• Custom Sections: Built-up H sections, plate girders, and stiffened columns to drawing.

• Certified Welding: SAW and GMAW welding with welders qualified to EN ISO 9606.

• Ready-to-Bolt: Web stiffeners, end plates, base plates, shear studs, and cleats fitted before shipment.

• Distortion Control: Controlled by sequence and camber during welding, not corrected afterwards.

​

🏗️ 4. Workshop Frame Packages We Supply

Most orders are not a single beam, but a working set for one building. Typical packages include:

• Portal Frame Workshop: Columns, rafters, haunches, knee and apex connections.

• Crane Workshop: Crane runway girders, crane columns, and brackets.

• Mezzanine & Platform: Primary beams, secondary beams, edge protection posts.

• Roof & Wall Support: Purlins, trusses, bracing, and sag rods.

• Equipment Support: Pipe racks, conveyor gantries, and machine base frames.

📊 5. From Drawing To Delivery (Workflow)

⏱️ 6. Lead Time & Shipping

• Custom Fabrication: 15 to 25 days after drawing approval for one container.

• Repeat Orders: Shorter cycle against an approved drawing (confirmed case by case).

• Phased Delivery: Plan issued with order confirmation for larger workshops.

• Shipping Updates: Loading plan, container photos, and packing list sent before the vessel departs.

📜 7. Records That Travel With The Steel

• Mill test certificates to EN 10204 3.1, heat number linked to member mark.

• Welder qualification records and Welding Procedure Specifications (WPS).

• Visual inspection on all welds, with UT or MT testing on request.

• Dimensional check against approved shop drawings (straightness and hole gauge recorded).

• Coating thickness record for painted and galvanized members.

📩 8. Send These And We Quote From The Drawing

To receive a mill-direct quotation within 12 working hours, please provide:

1. Drawing set or member schedule (with section types and lengths).

2. Steel grade and design standard (e.g., Q355B to EN 1090-2).

3. Surface system (Bare, primer + topcoat, or hot-dip galvanized).

4. Quantity, destination port, and required delivery window.

🏢 About Our Company

Hangzhou FAMOUS Steel Engineering Co., Ltd. (FASECbuildings) is a professional manufacturer and exporter of steel structures established in 2000. With decades of fabrication experience and a strong global presence, we are a trusted partner in the steel construction industry.

We specialize in integrated structural steel solutions, including H beams, steel columns, heavy plate girders, prefabricated buildings, and steel bridge components. Our products are exported to major markets worldwide, including Europe, North America, the Middle East, Africa, and Southeast Asia.

Our Commitment to Quality:

• Certifications: ISO 9001, CE Marking (EN 1090-2).

• Welding Excellence: Certified welders (EN ISO 9606, AWS D1.1 available upon request).

• Full Traceability: Mill Test Certificates (3.1) and comprehensive inspection reports for every shipment.

• One-Stop Service: From engineering detailing and fabrication to surface treatment and global logistics, we manage your project from drawing to final delivery.

🌐 Website: www.structural-steelbuilding.com | www.steelfabricat.com